The whole set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the form of rolls of 2.1 m length and a diameter of 60-90 cm. The thickness of this substance is 4 mm.
If you would like, you are able to boost the distance of the structure to 6 metres or more. To do this, it is sufficient to attach a two-meter expansion. When choosing a drawing, then focus on the space between the arches. This figure needs to be 65 cm, which is the most appropriate length for the specified depth of this material. The width of the doors based on the manufacturer’s drawing is 90 cm.
Before building a polycarbonate greenhouse, it’s important to pick a location because of its location. If this is done properly, it is possible to provide yourself with a crop of fresh vegetables for the entire year.
The location for your upcoming greenhouse is marked instantly at the preparation of their garden plot. To be able to melt the snow in the location of the greenhouse as early as possible, the best point on the website is going to be a slight elevation. In addition, in such a location will not have to worry about higher humidity as dirt and atmosphere within the structure.
Build a polycarbonate greenhouse in an elevated site – intends to care for the optimal temperature inside.
When it isn’t feasible to place a greenhouse on an elevated place, you will need to pour a layer of fine crushed stone around 20 cm and the exact same layer of fertile soil to create seedbeds.
Before assembling a greenhouse on your garden plot, you should also consider where and how this construction is going to be installed. First, you have to pick a place for this. The greenhouse ought to be located at a well-lit area no less than a couple meters away from houses, barns and other structures.
Be sure to measure the dirt surface – it is best to remove the surface. This can also eliminate weed seeds. And for ease of work, eliminate the soil in an area that’s going to a meter wider on both sides of the rectangle you want.
In addition, it is worth thinking about having a foundation. As producers say, today most greenhouses don’t need it, particularly if they (greenhouses) are employed just in the summer and spring period. But, experienced gardeners still recommend making at least a basic foundation from a pub. It’s quite simple – it is sufficient to connect with each other utilizing metal corners and screws four parts of wood with a cross-section of 10 * 10 cm. The dimensions of such a foundation should be equal to the foundation of the upcoming greenhouse.
You can even earn a strip foundation of concrete. He’s more dependable than a bar base, but requires greater fiscal and labour costs. Incidentally, the greenhouse, that is utilised in the winter, with no and don’t do without it whatsoever.
Stages of the formation of a strip base: a schematic representation
Many manufacturers counsel to set up greenhouse structures without even building a base. For this purpose, they equip the frame with special T-shaped legs, so the construction was firmly fixed. But, as practice shows, it’s still required to construct a base: therefore and the basis will be more securely fixed and also the elements of the basis that are in contact with the soil, will be saved much longer in its initial state.
The principal thing is to care for the material with special agents to protect the timber from moisture. The material is usually installed on concrete cubes which are dug into the ground. To get a six-meter arrangement, they need 10 pieces: four to each side and one in the middle of the gidpostroy.ru endings.
Before you perform the greenhouse , you will need to choose the ideal place for it. It has to be an even website, so that the framework was located evenly, without distortions. It needs to be sunny and not obscured by buildings or trees.